Details

---

These compact tilting furnaces for the melting of non-ferrous metals and alloys are one of a kind and have a number of technical advantages. Designed as tabletop models, they can be used for many laboratory applications. The practical counter balanced hinge with shock absorbers and the spout (not for KC 4/14) on the front of the furnace make exact dosing easy when pouring the melt. The melting furnaces are available for furnace chamber temperatures of 1000 °C, 1300 °C, or 1400 °C.

• Tmax 1000 °C, 1300 °C, or 1400 °C
• Crucible sizes of 0.75 liters, 1.5 liters or 3 liters
• Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
• Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP)
• Crucible with integrated pouring spout of clay-graphite included with delivery
• Additional spout (not for KC 4/14), mounted at the furnace for exact pouring
• Compact bench-top design, simple emptying of crucible by tiltiing system with gas damper
• Crucible for heating up of melting furnace insulated with a hinged lid, lid opened when pouring
• Defined application within the constraints of the operating instructions
• Controller R7 (resp. 3508 for KC)

Additional Equipment

• Other crucible types available, e.g. steel
• Design as bale-out furnace without tilting device, e.g. for lead melting
• Over-temperature limiter for the furnace chamber with automatic reset to protect against overtemperature. The limit controller switches off the heating when the pre-set limit temperature has been reached and does not switch it on again until the temperature falls below the setting again.
• Observation hole for melt

Model	Tmax furnace	Tmax melt bath	Crucible	Capacity		Volume	Outer dimensions3 in mm			Connected load	Weight
	°C	°C		in kg		in l	W	D	H	kW	in kg
				Al	Cu
K 1/10	1000	850	A6	1,5	-	0.75	600	710	670	3.0	85
K 2/10	1000	850	A10	3	-	1.50	600	710	670	3.0	90
K 4/10	1000	850	A25	7	-	3.00	670	800	710	3.5	110
K 1/131	1300	1150	A6	1,5	6	0.75	600	710	670	3.0	85
K 2/131	1300	1150	A10	3	10	1.50	600	710	670	3.0	90
K 4/131	1300	1150	A25	7	25	3.00	670	800	710	5.5	110
KC 1/142	1400	1250	A6	-	6	0.75	570	630	580	11.0	90
KC 2/142	1400	1250	A10	-	10	1.50	570	630	580	11.0	95
KC 4/142	1400	1250	A25	-	25	3.00	670	870	590	22.0	110
1Outer dimensions of furnace, transformer in separate housing (500 x 570 x 300 mm) 2Switchgear and controller mounted in a floor standing cabinet 3External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.